AFL源码分析(一)
前言
一直想学fuzz，但是由于自己太懒，一直没开始，最近终于开始学了，一直认为学习一个东西最好的办法，就是阅读源码，只有理解了源码，才能一通百通，我将从afl-gcc开始，一步一步的分析AFL的源码。
源码下载：
git clone https://github.com/google/AFL.gitafl-gcc
afl-gcc.c的main函数如下：
int main(int argc, char** argv) {
if (isatty(2) && !getenv("AFL_QUIET")) {
SAYF(cCYA "afl-cc " cBRI VERSION cRST " by <lcamtuf@google.com>\n");
} else be_quiet = 1;
if (argc < 2) {
SAYF("\n"
"This is a helper application for afl-fuzz. It serves as a drop-in replacement\n"
"for gcc or clang, letting you recompile third-party code with the required\n"
"runtime instrumentation. A common use pattern would be one of the following:\n\n"
" CC=%s/afl-gcc ./configure\n"
" CXX=%s/afl-g++ ./configure\n\n"
"You can specify custom next-stage toolchain via AFL_CC, AFL_CXX, and AFL_AS.\n"
"Setting AFL_HARDEN enables hardening optimizations in the compiled code.\n\n",
BIN_PATH, BIN_PATH);
exit(1);
}
find_as(argv[0]);
edit_params(argc, argv);
execvp(cc_params[0], (char**)cc_params);
FATAL("Oops, failed to execute '%s' - check your PATH", cc_params[0]);
return 0;
}我们需要关注的是find_as函数与edit_params函数，首先来看find_as函数，该函数用于寻找汇编器的位置：
static void find_as(u8* argv0) {
u8 *afl_path = getenv("AFL_PATH");
u8 *slash, *tmp;
if (afl_path) {
tmp = alloc_printf("%s/as", afl_path);
if (!access(tmp, X_OK)) {
as_path = afl_path;
ck_free(tmp);
return;
}
ck_free(tmp);
}
slash = strrchr(argv0, '/');
if (slash) {
u8 *dir;
*slash = 0;
dir = ck_strdup(argv0);
*slash = '/';
tmp = alloc_printf("%s/afl-as", dir);
if (!access(tmp, X_OK)) {
as_path = dir;
ck_free(tmp);
return;
}
ck_free(tmp);
ck_free(dir);
}
if (!access(AFL_PATH "/as", X_OK)) {
as_path = AFL_PATH;
return;
}
FATAL("Unable to find AFL wrapper binary for 'as'. Please set AFL_PATH");
}该函数首先获取了一下AFL_PATH这个环境变量，如果存在，那么将会访问AFL_PATH/as这个文件，如果能够访问，那么，AFL_PATH的路径就会被赋值给as_path，如果不存在，将会获取到路径中最后一次出现/的位置，并把/前的路径作为dir，然后在该路径下寻找是否存在/afl-as，如果存在，则把dir的路径赋值给as_path，如果以上两种办法都没有找到，就会报错。
接下来我们来看edit_params函数，首先来看获取参数的部分：
/* Copy argv to cc_params, making the necessary edits. */
static void edit_params(u32 argc, char** argv) {
u8 fortify_set = 0, asan_set = 0;
u8 *name;
#if defined(__FreeBSD__) && defined(__x86_64__)
u8 m32_set = 0;
#endif
cc_params = ck_alloc((argc + 128) * sizeof(u8*));
name = strrchr(argv[0], '/');
if (!name) name = argv[0]; else name++;
if (!strncmp(name, "afl-clang", 9)) {
clang_mode = 1;
setenv(CLANG_ENV_VAR, "1", 1);
if (!strcmp(name, "afl-clang++")) {
u8* alt_cxx = getenv("AFL_CXX");
cc_params[0] = alt_cxx ? alt_cxx : (u8*)"clang++";
} else {
u8* alt_cc = getenv("AFL_CC");
cc_params[0] = alt_cc ? alt_cc : (u8*)"clang";
}
} else {
/* With GCJ and Eclipse installed, you can actually compile Java! The
instrumentation will work (amazingly). Alas, unhandled exceptions do
not call abort(), so afl-fuzz would need to be modified to equate
non-zero exit codes with crash conditions when working with Java
binaries. Meh. */
#ifdef __APPLE__
if (!strcmp(name, "afl-g++")) cc_params[0] = getenv("AFL_CXX");
else if (!strcmp(name, "afl-gcj")) cc_params[0] = getenv("AFL_GCJ");
else cc_params[0] = getenv("AFL_CC");
if (!cc_params[0]) {
SAYF("\n" cLRD "[-] " cRST
"On Apple systems, 'gcc' is usually just a wrapper for clang. Please use the\n"
" 'afl-clang' utility instead of 'afl-gcc'. If you really have GCC installed,\n"
" set AFL_CC or AFL_CXX to specify the correct path to that compiler.\n");
FATAL("AFL_CC or AFL_CXX required on MacOS X");
}
#else
if (!strcmp(name, "afl-g++")) {
u8* alt_cxx = getenv("AFL_CXX");
cc_params[0] = alt_cxx ? alt_cxx : (u8*)"g++";
} else if (!strcmp(name, "afl-gcj")) {
u8* alt_cc = getenv("AFL_GCJ");
cc_params[0] = alt_cc ? alt_cc : (u8*)"gcj";
} else {
u8* alt_cc = getenv("AFL_CC");
cc_params[0] = alt_cc ? alt_cc : (u8*)"gcc";
}
#endif /* __APPLE__ */
}
从函数名就可以看出，该函数主要是设置必要的参数，函数首先通过比较strncmp来比较name，从而确定调用afl-g++、afl-gcc、afl-clang还是afl-clang++来对程序进行编译，如果是clang*，需要先将clang_mode设置为1，然后再来判断是调用clang++还是clang，并查找环境变量，来决定最终对cc_params[0]的赋值。
接下来我们看为gcc添加参数的部分：
while (--argc) {
u8* cur = *(++argv);
if (!strncmp(cur, "-B", 2)) {
if (!be_quiet) WARNF("-B is already set, overriding");
if (!cur[2] && argc > 1) { argc--; argv++; }
continue;
}
if (!strcmp(cur, "-integrated-as")) continue;
if (!strcmp(cur, "-pipe")) continue;
#if defined(__FreeBSD__) && defined(__x86_64__)
if (!strcmp(cur, "-m32")) m32_set = 1;
#endif
if (!strcmp(cur, "-fsanitize=address") ||
!strcmp(cur, "-fsanitize=memory")) asan_set = 1;
if (strstr(cur, "FORTIFY_SOURCE")) fortify_set = 1;
cc_params[cc_par_cnt++] = cur;
}
cc_params[cc_par_cnt++] = "-B";
cc_params[cc_par_cnt++] = as_path;
if (clang_mode)
cc_params[cc_par_cnt++] = "-no-integrated-as";
if (getenv("AFL_HARDEN")) {
cc_params[cc_par_cnt++] = "-fstack-protector-all";
if (!fortify_set)
cc_params[cc_par_cnt++] = "-D_FORTIFY_SOURCE=2";
}
if (asan_set) {
/* Pass this on to afl-as to adjust map density. */
setenv("AFL_USE_ASAN", "1", 1);
} else if (getenv("AFL_USE_ASAN")) {
if (getenv("AFL_USE_MSAN"))
FATAL("ASAN and MSAN are mutually exclusive");
if (getenv("AFL_HARDEN"))
FATAL("ASAN and AFL_HARDEN are mutually exclusive");
cc_params[cc_par_cnt++] = "-U_FORTIFY_SOURCE";
cc_params[cc_par_cnt++] = "-fsanitize=address";
} else if (getenv("AFL_USE_MSAN")) {
if (getenv("AFL_USE_ASAN"))
FATAL("ASAN and MSAN are mutually exclusive");
if (getenv("AFL_HARDEN"))
FATAL("MSAN and AFL_HARDEN are mutually exclusive");
cc_params[cc_par_cnt++] = "-U_FORTIFY_SOURCE";
cc_params[cc_par_cnt++] = "-fsanitize=memory";
}
if (!getenv("AFL_DONT_OPTIMIZE")) {
#if defined(__FreeBSD__) && defined(__x86_64__)
/* On 64-bit FreeBSD systems, clang -g -m32 is broken, but -m32 itself
works OK. This has nothing to do with us, but let's avoid triggering
that bug. */
if (!clang_mode || !m32_set)
cc_params[cc_par_cnt++] = "-g";
#else
cc_params[cc_par_cnt++] = "-g";
#endif
cc_params[cc_par_cnt++] = "-O3";
cc_params[cc_par_cnt++] = "-funroll-loops";
/* Two indicators that you're building for fuzzing; one of them is
AFL-specific, the other is shared with libfuzzer. */
cc_params[cc_par_cnt++] = "-D__AFL_COMPILER=1";
cc_params[cc_par_cnt++] = "-DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION=1";
}
if (getenv("AFL_NO_BUILTIN")) {
cc_params[cc_par_cnt++] = "-fno-builtin-strcmp";
cc_params[cc_par_cnt++] = "-fno-builtin-strncmp";
cc_params[cc_par_cnt++] = "-fno-builtin-strcasecmp";
cc_params[cc_par_cnt++] = "-fno-builtin-strncasecmp";
cc_params[cc_par_cnt++] = "-fno-builtin-memcmp";
cc_params[cc_par_cnt++] = "-fno-builtin-strstr";
cc_params[cc_par_cnt++] = "-fno-builtin-strcasestr";
}
cc_params[cc_par_cnt] = NULL;
}程序会跳过-B/-integrated-as/-pipe这几个参数，然后判断是否存在-fsanitize=address或-fsanitize=memory参数，如果存在，则将ASAN_set赋值为1，然后赋值cc_params[1]=cur，然后接下来程序自己添加了参数-B as_path，接下来前面设置了clang_mode=1，将会添加参数-no-integrated-as，接下来检查是否存在AFL_HARDEN环境变量，存在的话，将会添加参数-fstack-protector-all，如果存在该环境变量，还会检查fortify_set是否为0，如果为0，将会添加参数-D_FORTIFY_SOURCE=2，接下来会检查asan_set是否为1，如果为1了，将会进一步检察环境变量，并加上相应参数，这里与前面差不多，就不再赘述了，当不存在环境变量AFL_DONT_OPTIMIZE时，程序还会添加参数-g，-03，-funroll-loops，-D__AFL_COMPILER=1，-DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION=1，如果存在环境变量AFL_NO_BUILTIN，程序将会添加参数-fno-builtin-strcmp。
最后程序会向数组中放入\x00来结束输入。
接下来，当find_as函数与edit_params函数执行完成以后，程序将会调用execve函数，最终调用gcc。
afl-as
afl-as函数，是对as的包装，main函数实现如下：
int main(int argc, char** argv) {
s32 pid;
u32 rand_seed;
int status;
u8* inst_ratio_str = getenv("AFL_INST_RATIO");
struct timeval tv;
struct timezone tz;
clang_mode = !!getenv(CLANG_ENV_VAR);
if (isatty(2) && !getenv("AFL_QUIET")) {
SAYF(cCYA "afl-as " cBRI VERSION cRST " by <lcamtuf@google.com>\n");
} else be_quiet = 1;
if (argc < 2) {
SAYF("\n"
"This is a helper application for afl-fuzz. It is a wrapper around GNU 'as',\n"
"executed by the toolchain whenever using afl-gcc or afl-clang. You probably\n"
"don't want to run this program directly.\n\n"
"Rarely, when dealing with extremely complex projects, it may be advisable to\n"
"set AFL_INST_RATIO to a value less than 100 in order to reduce the odds of\n"
"instrumenting every discovered branch.\n\n");
exit(1);
}
gettimeofday(&tv, &tz);
rand_seed = tv.tv_sec ^ tv.tv_usec ^ getpid();
srandom(rand_seed);
edit_params(argc, argv);
if (inst_ratio_str) {
if (sscanf(inst_ratio_str, "%u", &inst_ratio) != 1 || inst_ratio > 100)
FATAL("Bad value of AFL_INST_RATIO (must be between 0 and 100)");
}
if (getenv(AS_LOOP_ENV_VAR))
FATAL("Endless loop when calling 'as' (remove '.' from your PATH)");
setenv(AS_LOOP_ENV_VAR, "1", 1);
/* When compiling with ASAN, we don't have a particularly elegant way to skip
ASAN-specific branches. But we can probabilistically compensate for
that... */
if (getenv("AFL_USE_ASAN") || getenv("AFL_USE_MSAN")) {
sanitizer = 1;
inst_ratio /= 3;
}
if (!just_version) add_instrumentation();
if (!(pid = fork())) {
execvp(as_params[0], (char**)as_params);
FATAL("Oops, failed to execute '%s' - check your PATH", as_params[0]);
}
if (pid < 0) PFATAL("fork() failed");
if (waitpid(pid, &status, 0) <= 0) PFATAL("waitpid() failed");
if (!getenv("AFL_KEEP_ASSEMBLY")) unlink(modified_file);
exit(WEXITSTATUS(status));
}我们首先来关注edit_params函数，函数的源码如下：
static void edit_params(int argc, char** argv) {
u8 *tmp_dir = getenv("TMPDIR"), *afl_as = getenv("AFL_AS");
u32 i;
#ifdef __APPLE__
u8 use_clang_as = 0;
/* On MacOS X, the Xcode cctool 'as' driver is a bit stale and does not work
with the code generated by newer versions of clang that are hand-built
by the user. See the thread here: http://goo.gl/HBWDtn.
To work around this, when using clang and running without AFL_AS
specified, we will actually call 'clang -c' instead of 'as -q' to
compile the assembly file.
The tools aren't cmdline-compatible, but at least for now, we can
seemingly get away with this by making only very minor tweaks. Thanks
to Nico Weber for the idea. */
if (clang_mode && !afl_as) {
use_clang_as = 1;
afl_as = getenv("AFL_CC");
if (!afl_as) afl_as = getenv("AFL_CXX");
if (!afl_as) afl_as = "clang";
}
#endif /* __APPLE__ */
/* Although this is not documented, GCC also uses TEMP and TMP when TMPDIR
is not set. We need to check these non-standard variables to properly
handle the pass_thru logic later on. */
if (!tmp_dir) tmp_dir = getenv("TEMP");
if (!tmp_dir) tmp_dir = getenv("TMP");
if (!tmp_dir) tmp_dir = "/tmp";
as_params = ck_alloc((argc + 32) * sizeof(u8*));
as_params[0] = afl_as ? afl_as : (u8*)"as";
as_params[argc] = 0;
for (i = 1; i < argc - 1; i++) {
if (!strcmp(argv[i], "--64")) use_64bit = 1;
else if (!strcmp(argv[i], "--32")) use_64bit = 0;
#ifdef __APPLE__
/* The Apple case is a bit different... */
if (!strcmp(argv[i], "-arch") && i + 1 < argc) {
if (!strcmp(argv[i + 1], "x86_64")) use_64bit = 1;
else if (!strcmp(argv[i + 1], "i386"))
FATAL("Sorry, 32-bit Apple platforms are not supported.");
}
/* Strip options that set the preference for a particular upstream
assembler in Xcode. */
if (clang_mode && (!strcmp(argv[i], "-q") || !strcmp(argv[i], "-Q")))
continue;
#endif /* __APPLE__ */
as_params[as_par_cnt++] = argv[i];
}
#ifdef __APPLE__
/* When calling clang as the upstream assembler, append -c -x assembler
and hope for the best. */
if (use_clang_as) {
as_params[as_par_cnt++] = "-c";
as_params[as_par_cnt++] = "-x";
as_params[as_par_cnt++] = "assembler";
}
#endif /* __APPLE__ */
input_file = argv[argc - 1];
if (input_file[0] == '-') {
if (!strcmp(input_file + 1, "-version")) {
just_version = 1;
modified_file = input_file;
goto wrap_things_up;
}
if (input_file[1]) FATAL("Incorrect use (not called through afl-gcc?)");
else input_file = NULL;
} else {
/* Check if this looks like a standard invocation as a part of an attempt
to compile a program, rather than using gcc on an ad-hoc .s file in
a format we may not understand. This works around an issue compiling
NSS. */
if (strncmp(input_file, tmp_dir, strlen(tmp_dir)) &&
strncmp(input_file, "/var/tmp/", 9) &&
strncmp(input_file, "/tmp/", 5)) pass_thru = 1;
}
modified_file = alloc_printf("%s/.afl-%u-%u.s", tmp_dir, getpid(),
(u32)time(NULL));
wrap_things_up:
as_params[as_par_cnt++] = modified_file;
as_params[as_par_cnt] = NULL;
}首先获取了环境变量TMPDIR是否存在，如果存在，则将tmp_dir设置为该环境变量的值，如果不存在，将会依次获取TEMP，TMP环境变量，如果都不存在，则将tmp_dir设置为/tmp，然后判断afl_as是否存在，如果存在，则将as_params[0]设置为afl_as，否则，设置为as。
然后通过判断参数--64是否存在，如果存在，则use_64bit为真，否则为0，并将as_params[as_par_cnt++]的值，设置为argv[i]。
接下来，将argv[argc-1]的值，作为输入文件，接下来，依次比较input_file与tmp_dir，/var/tmp，/tmp/是否相等，如果相等，则将pass_thru设置为1。并将modified_file设置为tmp目录下的.s文件。
然后进行 as_params[as_par_cnt++] = modified_file;以及as_params[as_par_cnt] = NULL。
接下来我们来看另外一个函数add_instrumentation，该函数用于对文件的插桩，是重点函数，函数源码如下：
static void add_instrumentation(void) {
static u8 line[MAX_LINE];
FILE* inf;
FILE* outf;
s32 outfd;
u32 ins_lines = 0;
u8 instr_ok = 0, skip_csect = 0, skip_next_label = 0,
skip_intel = 0, skip_app = 0, instrument_next = 0;
#ifdef __APPLE__
u8* colon_pos;
#endif /* __APPLE__ */
if (input_file) {
inf = fopen(input_file, "r");
if (!inf) PFATAL("Unable to read '%s'", input_file);
} else inf = stdin;
outfd = open(modified_file, O_WRONLY | O_EXCL | O_CREAT, 0600);
if (outfd < 0) PFATAL("Unable to write to '%s'", modified_file);
outf = fdopen(outfd, "w");
if (!outf) PFATAL("fdopen() failed");
while (fgets(line, MAX_LINE, inf)) {
/* In some cases, we want to defer writing the instrumentation trampoline
until after all the labels, macros, comments, etc. If we're in this
mode, and if the line starts with a tab followed by a character, dump
the trampoline now. */
if (!pass_thru && !skip_intel && !skip_app && !skip_csect && instr_ok &&
instrument_next && line[0] == '\t' && isalpha(line[1])) {
fprintf(outf, use_64bit ? trampoline_fmt_64 : trampoline_fmt_32,
R(MAP_SIZE));
instrument_next = 0;
ins_lines++;
}
/* Output the actual line, call it a day in pass-thru mode. */
fputs(line, outf);
if (pass_thru) continue;
/* All right, this is where the actual fun begins. For one, we only want to
instrument the .text section. So, let's keep track of that in processed
files - and let's set instr_ok accordingly. */
if (line[0] == '\t' && line[1] == '.') {
/* OpenBSD puts jump tables directly inline with the code, which is
a bit annoying. They use a specific format of p2align directives
around them, so we use that as a signal. */
if (!clang_mode && instr_ok && !strncmp(line + 2, "p2align ", 8) &&
isdigit(line[10]) && line[11] == '\n') skip_next_label = 1;
if (!strncmp(line + 2, "text\n", 5) ||
!strncmp(line + 2, "section\t.text", 13) ||
!strncmp(line + 2, "section\t__TEXT,__text", 21) ||
!strncmp(line + 2, "section __TEXT,__text", 21)) {
instr_ok = 1;
continue;
}
if (!strncmp(line + 2, "section\t", 8) ||
!strncmp(line + 2, "section ", 8) ||
!strncmp(line + 2, "bss\n", 4) ||
!strncmp(line + 2, "data\n", 5)) {
instr_ok = 0;
continue;
}
}
/* Detect off-flavor assembly (rare, happens in gdb). When this is
encountered, we set skip_csect until the opposite directive is
seen, and we do not instrument. */
if (strstr(line, ".code")) {
if (strstr(line, ".code32")) skip_csect = use_64bit;
if (strstr(line, ".code64")) skip_csect = !use_64bit;
}
/* Detect syntax changes, as could happen with hand-written assembly.
Skip Intel blocks, resume instrumentation when back to AT&T. */
if (strstr(line, ".intel_syntax")) skip_intel = 1;
if (strstr(line, ".att_syntax")) skip_intel = 0;
/* Detect and skip ad-hoc __asm__ blocks, likewise skipping them. */
if (line[0] == '#' || line[1] == '#') {
if (strstr(line, "#APP")) skip_app = 1;
if (strstr(line, "#NO_APP")) skip_app = 0;
}
/* If we're in the right mood for instrumenting, check for function
names or conditional labels. This is a bit messy, but in essence,
we want to catch:
^main: - function entry point (always instrumented)
^.L0: - GCC branch label
^.LBB0_0: - clang branch label (but only in clang mode)
^\tjnz foo - conditional branches
...but not:
^# BB#0: - clang comments
^ # BB#0: - ditto
^.Ltmp0: - clang non-branch labels
^.LC0 - GCC non-branch labels
^.LBB0_0: - ditto (when in GCC mode)
^\tjmp foo - non-conditional jumps
Additionally, clang and GCC on MacOS X follow a different convention
with no leading dots on labels, hence the weird maze of #ifdefs
later on.
*/
if (skip_intel || skip_app || skip_csect || !instr_ok ||
line[0] == '#' || line[0] == ' ') continue;
/* Conditional branch instruction (jnz, etc). We append the instrumentation
right after the branch (to instrument the not-taken path) and at the
branch destination label (handled later on). */
if (line[0] == '\t') {
if (line[1] == 'j' && line[2] != 'm' && R(100) < inst_ratio) {
fprintf(outf, use_64bit ? trampoline_fmt_64 : trampoline_fmt_32,
R(MAP_SIZE));
ins_lines++;
}
continue;
}
/* Label of some sort. This may be a branch destination, but we need to
tread carefully and account for several different formatting
conventions. */
#ifdef __APPLE__
/* Apple: L<whatever><digit>: */
if ((colon_pos = strstr(line, ":"))) {
if (line[0] == 'L' && isdigit(*(colon_pos - 1))) {
#else
/* Everybody else: .L<whatever>: */
if (strstr(line, ":")) {
if (line[0] == '.') {
#endif /* __APPLE__ */
/* .L0: or LBB0_0: style jump destination */
#ifdef __APPLE__
/* Apple: L<num> / LBB<num> */
if ((isdigit(line[1]) || (clang_mode && !strncmp(line, "LBB", 3)))
&& R(100) < inst_ratio) {
#else
/* Apple: .L<num> / .LBB<num> */
if ((isdigit(line[2]) || (clang_mode && !strncmp(line + 1, "LBB", 3)))
&& R(100) < inst_ratio) {
#endif /* __APPLE__ */
/* An optimization is possible here by adding the code only if the
label is mentioned in the code in contexts other than call / jmp.
That said, this complicates the code by requiring two-pass
processing (messy with stdin), and results in a speed gain
typically under 10%, because compilers are generally pretty good
about not generating spurious intra-function jumps.
We use deferred output chiefly to avoid disrupting
.Lfunc_begin0-style exception handling calculations (a problem on
MacOS X). */
if (!skip_next_label) instrument_next = 1; else skip_next_label = 0;
}
} else {
/* Function label (always instrumented, deferred mode). */
instrument_next = 1;
}
}
}
if (ins_lines)
fputs(use_64bit ? main_payload_64 : main_payload_32, outf);
if (input_file) fclose(inf);
fclose(outf);
if (!be_quiet) {
if (!ins_lines) WARNF("No instrumentation targets found%s.",
pass_thru ? " (pass-thru mode)" : "");
else OKF("Instrumented %u locations (%s-bit, %s mode, ratio %u%%).",
ins_lines, use_64bit ? "64" : "32",
getenv("AFL_HARDEN") ? "hardened" :
(sanitizer ? "ASAN/MSAN" : "non-hardened"),
inst_ratio);
}
}首先判断了input_files是否存在，如果存在，则打开它，并进行下一步，打开modified_file，并从输入文件中，读入内容到line数组中。
接下来，根据代码的注释可以知道，只需要对.text段进行插桩，所以接下来进行了一系列的判断：
instr_ok用来判断是否为text段，如果是则为1，否则为0。skip_csect用来判断是32位还是64位，如果为64位则为1，否则为0。skip_intel用来判断是否为intel架构，如果是则为1，否则为0。skip_app用来判断ad-hoc __asm__块（咱就是说不懂这是啥），如果存在则为1，否则为0。
接下来，程序会判断各个标志位的值，并判断第一行是否为#或 ，通过判断后，程序会判断是否是需要插桩的位置：^\tjnz foo - conditional branches，满足该条件，且R(100)<inst_ratio，则会进行插桩，这里的R(100)是一个宏定义，用来对随机数取余，而inst_ratio则是插桩的密度。然后根据前面设置的use_64bit是否为1，来判断是写入trampoline_fmt_64还是trampoline_fmt_32。
接下来会判断lines数组中是否有:，并且第一个字符是否是.，如果是，则代表需要对函数或者分支指令插桩。接下来判断如下：
.L0:则说明是GCC下的分支指令，进行插桩。.LBB0_0:且clang_mode为1，则说明是clang下的分支指令，进行插桩。- 两者都不是的话，则说明是一个函数，对其进行插桩。
然后根据架构，向modified_file中，写入main_payload_64或者main_payload_32，并关闭文件。
到这里，afl-as也就基本讲完了，主函数中会调用这两个函数，对程序进行插桩。
本文参与 腾讯云自媒体同步曝光计划，分享自作者个人站点/博客。
原始发表：2022-11-23，如有侵权请联系 cloudcommunity@tencent.com 删除
评论
登录后参与评论
推荐阅读
目录
腾讯云开发者
