发布者:全栈程序员栈长,转载请注明出处:https://javaforall.cn/143671.html原文链接:https://javaforall.cn
Main() ../hostapd/main.c + 552
hostapd是一个IEEE 802.11的AP和IEEE 802.1X/WPA/WPA2/EAP/RADIUS验证器.此页面用于怎么在linux系统下使用它.其他操作系统请参考hostapd主页
它实现了IEEE 802.11相关的接入管理,IEEE 802.1X/WPA/WPA2/EAP 认证, RADIUS客户端,EAP服务器和RADIUS 认证服务器。
AP模式: Access Point,提供无线接入服务,允许其它无线设备接入,提供数据访问,一般的无线路由/网桥工作在该模式下。AP和AP之间允许相互连接。
最近发现自己的Debian之前可以使用GNOME3下的networkmanager进行WIFI共享上网功能因为内核升级导致无法使用。无奈只好再次通过Hostapd来进行WIFI热点设置,同时为了更块的DNS解析,本次顺便也在本地安装了dnsmasq软件实现了本地化的DNS查询服务,成功恢复了我的小本本作为热点的能力。总结方法如下:
hostapd is an IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator. This page is dedicated to the Linux documentation of it’s implementation and use. Please refer to the hostapd home page for information for other Operating Systems. As far a Linux is concerned, out of the old drivers you can only use these 3 drivers with hostapd: HostAP madwifi prism54 All new mac80211 based drivers that implement AP functionality are supported with hostapd’s nl80211 driver. The mac80211 subsystem moves all aspects of master mode into user space. It depends on hostapd to handle authenticating clients, setting encryption keys, establishing key rotation policy, and other aspects of the wireless infrastructure. Due to this, the old method of issuing ‘ iwconfig <wireless interface> mode master’ no longer works. Userspace programs like hostapd now use netlink (the nl80211 driver) to create a master mode interface for your traffic and a monitor mode interface for receiving and transmitting management frames. Getting hostapd Using your distributions hostapd It is advisable to try your distributions version of hostapd before taking the time to compile and install your own copy. This will make future maintenance easier as you’ll be able to use the init scripts shipped by the distro and hostapd will be updated by it as well. If your distribution ships 0.6.8 or later, you can test with this bare minimum config by creating the file hostapd-minimal.conf: #change wlan0 to your wireless device interface=wlan0 driver=nl80211 ssid=test channel=1 If that config errors out with something like: hostapd $ sudo hostapd ./hostapd-minimal.conf Configuration file: ./hostapd-minimal.conf Line 2: invalid/unknown driver ‘nl80211’ 1 errors found in configuration file ‘./hostapd-minimal.conf’ that means that your distro is not shipping hostapd with nl80211 driver support and you’ll need to follow the building instructions that follow. If it works, you can skip down to the configuring hostapd secti
0x00. 企业级WPA/WPA2简介 WPA/WPA2企业版:在大型企业网络中,通常采用802.1X的接入认证方式。802.1X认证是一种基于接口的网络接入控制,用户提供认证所需的凭证,如用户名和密码,通过特定的用户认证服务器(一般是RADIUS服务器)和可扩展认证协议EAP(Extensible Authentication Protocol)实现对用户的认证。WPA/WPA2支持基于EAP-TLS(Transport Layer Security)和EAP-PEAP(Protected EAP)的8
hostapd能够使得无线网卡切换为master模式,模拟AP(通常可以认为是路由器)功能,也就是我们说的软AP(Soft AP)。hostapd的功能就是作为AP的认证服务器,负责控制管理stations(通常可以认为带无线网卡的PC)的接入和认证。
Hostapd的功能就是作为AP的认证服务器,负责控制管理stations(通常可以认为带无线网卡的PC)的接入和认证。 通过Hostapd可以将无线网卡切换为AP/Master模式,通过修改配置文件,可以建立一个开放式的(不加密)的,WEP,WPA或WPA2的无线网络。并且通过修改配置文件可以设置无线网卡的各种参数,包括频率,信号,beacon包时间间隔,是否发送beacon包,如果响应探针请求等等。还可以设置mac地址过滤条件等。
我们有个闲置的USB无线适配器(WIFI适配器),而我们的ISP路由器却是有线的。怎样把我们的家庭NAS服务器变成无线访问点(WAP),在不用买额外的WPA盒子的情况下,在Debian或Ubuntu系统下使用无线设备访问到它?
背景 笔者学校的无线网络采用1x认证方式,所以你懂的。之前参考GitHub上的一个项目在Kali2.0上部署成功,但是在手机端的情况比较不同,猜测是因为架构有一定区别所导致的,而且该网页上的Hostapd版本比较低,遂继续查找,找到了aircrack-ng的GitHub的某一个页面上展示了Hostapd-wpe的用法(详情点击阅读原文查看) 页面上写的比较详细,但是实践中笔者还是踩了不少坑,下面开始:(注意:本文在Kali 2.0及以上的版本中应该也适用!但是本人没有测试,还请测试通过的朋友留个言) 依
Augmented Traffic Control(又名atc)是一种模拟网络状况的工具。由facebook开源,是一个允许开发人员控制设备与互联网连接的项目。atc可以模拟不同的网络条件,包括控制带宽,延迟,数据包丢失、数据包损坏、数据包重排序等几个因素都可以由atc来控制。atc运行在网关,可以控制连接到该网络的手机,设备的网络,atc有一个web界面,通过这个界面可以来切换不同的网络情况。atc内部使用了iptables和tc,因此只支持linux平台。
本节主要介绍我们开发过程中,WiFi常用的开发工具,内容主要介绍工具种类以及基本的使用方法,更多使用可以见后面章节。
项目过程中需要添加AP热点的需求,自然会想用到hostapd,具体的不做分析,自行百度,这里主要分析下启动脚本
本周,谷歌 Project Zero 项目的研究员 Gal Beniamini 公布了 iPhone Wi-Fi 固件的漏洞利用 POC。这个漏洞(CVE-2017-11120)是个内存损坏(memo
hostapd能够使得无线网卡切换为master模式,模拟AP(通常可以认为是路由器)功能,也就是我们说的软AP(Soft AP)。
最近接到一个调试 wifi 驱动的任务,使用的是 rtl8723bs 芯片组。要求是让无线设备工作在 station 模式的时候同时开启一个 ap 热点。简单来讲就是连接其他 wifi 的同时发出一个 wifi 供其他设备使用。保证都能上网。
一、环境准备 0x01 kali虚拟机 📷 0x02 USB无线网卡 📷 二、制作钓鱼WIFI 0x01 接入无线网卡到kali 📷 0x02 配置无线网卡 在终端执行ifconfig查看是否有wlan0如果存在,我们需要激活为监听模式。 ifconfig airmon-ng start wlan0 📷 📷 0x03 配置hostapd vim hostapd.conf 📷 interface=wlan0mon driver=nl80211 ssid=Free-Wifi #无线名称 随意即可 hw_
关于Pinecone Pinecone是一款专为红队研究人员设计的WLAN网络安全审计框架,该工具基于模块化开发,允许广大研究人员根据任务需求进行自定义功能扩展。Pinecone设计之初专用于树莓派,可以将树莓派打造为便携式无线网络安全审计工具,但也可以在基于Debian的操作系统中运行。 工具要求 如需运行Pinecone,首先我们需要一个基于Debian的操作系统(该工具已在树莓派、树莓派桌面端和Kali Linux上进行过测试)。 接下来,还需要安装并配置好下列组件: 1、Python 3.
大家好,又见面了,我是你们的朋友全栈君。 Hostapd Android https://github.com/lnmcc/hostapd-android http://www.omitol.com/
设置热点这个操作貌似常见于手机,流量王大佬每次秀流量不是说刷刷视频那么简单,直接就跟周边人说“大家把现有的无线网关闭,全部连接我的”,这是大佬!
0x00-设置更新源 在apt-get install xxx前要记得更新源哦,在用官网源更新,需要代理,关于如何设置代理,在玄魂工作室微信订阅号(xuanhun521)的菜单里找到下面这篇文章,里面
由于要共享无线给android,虽然cm6.1可以用ad-hoc,但感觉android连ad-hoc要比连ap耗电。本来想看看有什么usb无线网卡可以在linux下用软ap,顺便用来替换掉上网本的无线网卡,我的上网本在linux下的无线驱动太差劲(可恨的rtl8187),连ad-hoc都不支持。结果在http://linuxwireless.org上发现我台式机的无线网卡的ath5k驱动很完善,可以用软ap,ath5k太可爱了。回来搞了一个晚上加一个中午,终于用hostapd,dnsmasq实现了软ap。可怜的netmanager要报废咯~
#openssl CFLAGS += -I/lhome/srwang/third/openssl/src/openssl-1.0.2h/__install/include/ LIBS += -L/lhome/srwang/third/openssl/src/openssl-1.0.2h/__install/lib #libnl CFLAGS += -I/lhome/srwang/third/libnl/src/libnl-3.2.25/__install/include/libnl3/ CFLAGS += -I/lhome/srwang/third/libnl/src/libnl-3.2.25/__install/include/
无论作为网络运维人员,还是安全渗透工程师,在工作中都会无可避免地碰到网络抓包的需求。
有线就插上网线,没什么好说的;无线的话一种是将WIFI模块集成焊接在板子上,另一种是WIFI模块以USB的方式接到板子上。
大家好,又见面了,我是你们的朋友全栈君。##### hostapd configuration file ############################################## # Empty lines and lines starting with # are ignored
WiFi信道根据国家地区的不同,有着严格的频道划分,某些5G信道可以作为雷达探测使用,这意味着 如果有路由器工作在雷达探测保留信道,那么意味着你很可能不能在上边注入,解除认证,以及创建虚假克隆 AP。因此我们需要根据WiFi信道顺从表,修改内核监管域国家代码,以影响无线网卡工作频段,使其 能正常注入、解除认证、创建AP等
这部分主要还是比较底层的抓包。这里就不过多的介绍了,毕竟好多大神的文章都写的很详细,主要内容还是以第三为主。
deepin系统下如何设置wifi热点(亲测有效) deepin wifi ap linux 热点 首先必须吐槽一下linux下设置wifi太累了。。。。来来回回折腾了我好久的说。心累... 好了废话不多说直接上教程,经历过的坑感兴趣的可以看文章结尾,让我们抬起头一起迎接初升的太阳~~~ 1. 我的系统环境 操作系统: deepin os 15.3 ifconfig: 1 enp2s0f1: flags=... 2 inet ... 3 inet6 ... 4 inet6 ... 5 ether
Hello,小伙伴们晚上好。今天我们来搭建一个钓鱼Wi-Fi,这里需要一台双网卡的电脑(其中一个网卡必须是无线网卡)。系统采用的是ubuntu18,安装步骤就省略啦
转载自:老丁的Linux:http://laoding.blog.51cto.com/980622/1697015
发布者:全栈程序员栈长,转载请注明出处:https://javaforall.cn/143200.html原文链接:https://javaforall.cn
1. 前言 本文将描述怎么用最快和最低成本搭建一个ATC服务来构造一个弱网络wifi,然后使用自研的PC工具“网络分析大师”来快捷地切换不同的弱网络场景,免去配置ATC弱网络参数的繁杂。 1.1 安装程序 包括: 1. Vmware Workstation虚拟机 2. Ubuntu 14.04操作系统虚拟机镜像vmdk 3. Ubuntu 14.04操作系统iso-64位 4.网络分析大师 1.2 网络环境 需要使用体验网或外网 1.3 硬件要求 一台PC,一块无线网卡(建议如下的带多天线的PCI网卡,亲
You need to bridge the interface which is having an IP with the wifi
用于测试客户端或接入点(AP)是否受到针对WPA2的KRACK攻击的影响。
Android9.0中对热点做了较大改动,将热点很大程度从Wifi中剥离出来了。 下面我们看一下热点是怎么开启的。
CVE-2019-6203:苹果设备在PEAP认证上存在缺陷,攻击者可强迫苹果设备接入恶意热点。
随着物联网的蓬勃发展,WIFI被广泛的应用在各种嵌入式系统中。WIFI一般有两种工作模式,一个是工作在AP模式下,另外一个是Station模式。以你的手机WIFI为例,你最经常使用的功能是去连接某个WIFI热点上网,这时它工作在Station模式下。有时你也会共享个热点,让自己的手机被其他手机连接上网,这时就是工作在AP模式下。本篇以Realtek USB接口的RTL8188 WIFI模块为例,对Linux下WIFI使用做个简单总结,希望对大家有所帮助。
前一段时间把家里的小米路由器 3Pro 刷成了 OpenWrt19.07.7,小米路由器的固件非常的垃圾,已经有的几台小米路由器会跳ping,长连接过多可能会无响应。但是同样 mt7621a 的京东云路由还有性能更差的 360 安全路由没有出现过这样的问题。
这是 酒仙桥六号部队 的第 83 篇文章。全文共计2449个字,预计阅读时长9分钟。1 为什么最亲近?随着近些年国内网络基础建设的飞速发展,无线WiFi的覆盖面已经很广了。几乎每个人每天都会有所接触,办公也好、下班后刷剧打游戏也好。不知道算不算最亲近?2 为什么又是陌生人想一下下面几个场景:你独自一人出差,住某酒店并且连接酒店WiFi,半夜醒来忽然发现手机在
初次编译的官方下载的文件编译缺文件,采用利尔达发送过来的程序 存在网盘(20171128 3018-AP.rar)
发布者:全栈程序员栈长,转载请注明出处:https://javaforall.cn/132767.html原文链接:https://javaforall.cn
FruityWIfi是一款有名的无线安全审计的开源工具,其灵感来自于wifipineapple,目前该工具已经更新到2.4。它能够让用户通过web界面来控制和管理模块,十分方便。FriutyWifi最初的设想是能够在树莓派上使用,但是也可以安装在Debian系列的操作系统上,例如Debian,kali Linux等,甚至可以安装在NetHunter上,在某些移动设备上使用。 一、本次使用的环境 硬件为树莓派3B,系统为raspbian jessie。 二、安装方法 -下载zip压缩文件:https://g
1.创建热点 创建WiFi热点使用的GitHub上一个开源项目: https://github.com/oblique/create_ap #将代码copy到本地,安装sudo git clone https://github.com/oblique/create_apcd create_apsudo make install #安装依赖的库sudo apt-get install util-linux procps hostapd iproute2 iw haveged dnsmasq 此时你可以创建热点
我们选择使用 buildroot 构建镜像,不使用官方镜像,不然就不需要费心考虑这些底层细节了。
前几日看到一则新闻,一家星巴克店内无线网络被发现植入了恶意代码,劫持网络流量利用用户设备挖掘门罗币(XMR)。 与加密货币相关的安全事件总是引人注目,我们除了认识到门罗币具有一定的入手价值外,还再次见
具体的编译步骤已经在玩转「Wi-Fi」系列之wpa_supplicant 介绍(七)描述过,这里针对编译过程中遇到的错误做总结
领取专属 10元无门槛券
手把手带您无忧上云