问题背景 移植 Linux-4.9 或之前的内核版本下的 wifi 驱动到 Linux-5.4 内核版本时会出现编译和运行错误, 该 FAQ 主要用于帮助开发人员解决驱动移植出现的问题。
---- layout: default title: linux没有wifi category: [技术, 安全] comments: true --- linux的wifi出现问题的介绍 几次重装linux系统,经常出现没有wifi的状况 错误详情 之前安装过CentOS,Kylin,OpenSU,等等经常出现没有wifi的状况,虽说猜测是遇到驱动问题,但是一直没有花时间去尝试解决. 今天再次遇到这个问题,而且已经重装两次了,还没有解决,只能直接找解决方案了. 目前的系统是ubuntu gnom
介绍Allwinner 平台上Wi-Fi 驱动移植,介绍Tina Wi-Fi 管理框架,包括Station,Ap 以及Wi-Fi 常见问题。
当前采用的WIFI是360随身WIFI,这款随身WIFI所用的网卡芯片是 Ralink(雷凌科技) 的解决方案(在上篇文章里也有详细介绍),芯片型号为 MT7601。 如果在PC计算机上使用这款随身WIFI那自然是简单,官网下载个驱动安装插上就能使用。 如果是在嵌入式平台,自动的平台上使用,官网就没有现成的驱动下载了,这种情况下就需要针对WIFI编写驱动。当然,从0开始写确实困难,不过这款芯片官方提供了linux下的驱动源码,这就好办了。只需要下载下来,编译就能使用了。
大家好,又见面了,我是你们的朋友全栈君。 开发板:友善之臂smart210 操作系统:Ubuntu 12,04 交叉编译器:arm-none-linux-gnueabi gcc version 4.3.2 WIFI 模组:TP-LINK TL-WN725N 2.0
随着物联网的蓬勃发展,WIFI被广泛的应用在各种嵌入式系统中。WIFI一般有两种工作模式,一个是工作在AP模式下,另外一个是Station模式。以你的手机WIFI为例,你最经常使用的功能是去连接某个WIFI热点上网,这时它工作在Station模式下。有时你也会共享个热点,让自己的手机被其他手机连接上网,这时就是工作在AP模式下。本篇以Realtek USB接口的RTL8188 WIFI模块为例,对Linux下WIFI使用做个简单总结,希望对大家有所帮助。
编者按:这篇文章介绍了笔者解决archlinux+kde plasma环境无法链接无线网的问题。笔者通过查阅archlinux wiki与Google定位问题,重新安装Linux无线网卡固件解决了问题。
一、前言 CentOS6.5不像CentOS7和Unbuntu那样自动安装好了无线网卡驱动,因此需要我们折腾一下。 二、安装前的准备工作 [a] 检查无线网卡驱动的安装情况(通过查看网络接口的安装情况来检查) 在虚拟终端下输入: #> iwconfig 若显示如下信息,则表示未安装无线网卡驱动 lo no wireless extensions. # 本地
NAT is the most commonly used way to share a single IP address with a private network, and it’s nearly universal in home and small office networks. In Linux, the variant of NAT that most people use is known as IP masquerading.
本文将介绍如何在 Windows、Linux 和 macOS 上探索您曾经连接到的任何网络的已保存密码。
Manjaro Linux(或简称 Manjaro)是基于 Arch Linux 的 Linux 发行版,使用 Xfce 、GNOME和 KDE Plasma 作为默认桌面环境,和 Arch 一样,采用滚动更新。其目标是为 PC 提供易于使用的自由的操作系统。 Manjaro Linux 基于 Arch Linux,但拥有自己独立的软件仓库。Manjaro 的目标是让强大的 Arch 更方便用户使用,Manjaro 使用著名的 Pacman 且可以直接利用 AUR 上的资源。Manjaro 本身使用三个软件仓库:不稳定库,即含有那些不成熟的 Arch 包,这些包与 Arch 源有 1-2 天 的延后;测试库,每周同步一次,包含那些 Arch 不稳定源的包;以及稳定库,包含那些由开发团队确认稳定的软件。
hostapd is an IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator. This page is dedicated to the Linux documentation of it’s implementation and use. Please refer to the hostapd home page for information for other Operating Systems. As far a Linux is concerned, out of the old drivers you can only use these 3 drivers with hostapd: HostAP madwifi prism54 All new mac80211 based drivers that implement AP functionality are supported with hostapd’s nl80211 driver. The mac80211 subsystem moves all aspects of master mode into user space. It depends on hostapd to handle authenticating clients, setting encryption keys, establishing key rotation policy, and other aspects of the wireless infrastructure. Due to this, the old method of issuing ‘ iwconfig <wireless interface> mode master’ no longer works. Userspace programs like hostapd now use netlink (the nl80211 driver) to create a master mode interface for your traffic and a monitor mode interface for receiving and transmitting management frames. Getting hostapd Using your distributions hostapd It is advisable to try your distributions version of hostapd before taking the time to compile and install your own copy. This will make future maintenance easier as you’ll be able to use the init scripts shipped by the distro and hostapd will be updated by it as well. If your distribution ships 0.6.8 or later, you can test with this bare minimum config by creating the file hostapd-minimal.conf: #change wlan0 to your wireless device interface=wlan0 driver=nl80211 ssid=test channel=1 If that config errors out with something like: hostapd $ sudo hostapd ./hostapd-minimal.conf Configuration file: ./hostapd-minimal.conf Line 2: invalid/unknown driver ‘nl80211’ 1 errors found in configuration file ‘./hostapd-minimal.conf’ that means that your distro is not shipping hostapd with nl80211 driver support and you’ll need to follow the building instructions that follow. If it works, you can skip down to the configuring hostapd secti
知名密码破解软件Hashcat在2018年8月2日发布了4.2版本,这次版本更新的主要内容是增加了4个新的密码算法支持。
修改启动项 rcconf 该工具用于设置开机启动项 rcconf –list 罗列所有开机启动列表 rcconf –on 开启开机服务 rcconf –on 关闭开机启动 例如 sudo rcconf --list | grep "wicd" // 找到wicd开机启动显示 wicd off sudo rcconf --on wicd // 开启开机启动 该工具的原理其实很简单: runlevel 查看当前的默认开机运行级别, 我的电脑显示N 5,
在 Linux 中查找可用的网络接口 我们可以通过几种方式找到可用的网卡。在本指南中,我们将讨论列出 Linux 中网络接口卡的 10 种方法。 1. 使用 ifconfig 命令列出网络接口 使用ifconfig命令查找网络接口详细信息的最常用方法。我相信一些 Linux 用户可能仍在使用它。 $ ifconfig -a enp5s0: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 24:b6:fd:37:8b:29 txqueuelen 1000 (Eth
AP模式: Access Point,提供无线接入服务,允许其它无线设备接入,提供数据访问,一般的无线路由/网桥工作在该模式下。AP和AP之间允许相互连接。
Ubuntu/Mint Linux 安装好通常可以直接连接到网络,但有的设备可能连接WIFI是出现问题。在Desktop环境下根本看不到无线连接图标和选项,简单几步,试试能不能解决:
国内流传的大多数关于fluxion的教程都是老版本的,版本4的我都没找到过,所以特地从国外把这篇文章给搬过来了,如果有人需要可以参考,本打算自己写一篇的,但是由于这个工具的核心是社工,所以在实战过程中我从来就没成功过,所以也就懒得写。如果需要翻译的,或者实践过程中遇到什么问题,欢迎随时骚扰。
Kali Linux 前身是著名渗透测试系统BackTrack ,是一个基于 Debian 的 Linux 发行版,包含很多安全和取证方面的相关工具。Kali Linux 1.1.0 版本能很好的运行在 ARM 硬件中,使用 Linux Kernel 3.18,更多更新内容请看发行说明。 更新说明 经过了两年的开发,我们今天荣幸的宣布Kali Linux 1.1.0发布了。这个版本对硬件支持将更加给力,对我们来说,这是我们从BackTrack过渡到Kali Linux的重要里程碑。 功能简介 升级为
请注意尽量不要尝试其它系统,因为我之前用的 Ubuntu12.02,但是安装软件的时候就遇到了很大的问题,据说是软件源已经不更新了,无奈只能重装系统装回了 Ubuntu14.04 。
hostapd是一个IEEE 802.11的AP和IEEE 802.1X/WPA/WPA2/EAP/RADIUS验证器.此页面用于怎么在linux系统下使用它.其他操作系统请参考hostapd主页
少说废话,每一步都经过验证: 1. 首先查看一下当前使用的linux版本: gxjun@gxjun:~$ uname -r 4.8.0-59-generic 2. 将360wifi插入PC的USB中,然后输入: gxjun@gxjun:~$ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 09da:c10a A4Tech Co., Ltd. Bus 0
之前在《廉价的家用工作站方案:前篇》一文中,我提到过使用两台笔记本设备作为轻量的家用工作站。
我们有个闲置的USB无线适配器(WIFI适配器),而我们的ISP路由器却是有线的。怎样把我们的家庭NAS服务器变成无线访问点(WAP),在不用买额外的WPA盒子的情况下,在Debian或Ubuntu系统下使用无线设备访问到它?
试了下还是很不错的,andrax是一款专为Android智能手机设计的渗透测试平台,而kali linux的NetHunter只是一款Debian模拟运行工具一句话:andrax比nethunter只强不弱
作者 LittleHann 目录 1. 无线安全研究需要的软硬件选型、及物理电气参数 2. 无线攻击第一步: "网络AP探测"、扫描器的使用 1. 无线安全研究需要的软硬件选型、及物理电气参数 在进行实际的无线安全攻击、研究之前,我们需要准备一些硬件设备、包括与之配套的软件。基本上来说,无线黑客技术需要涉及到以下几个组件 1. 底层芯片组 不论是USB网卡、PCI网卡、还是PCMCIA内置网卡,它们的核心都是"芯片组",即我们现在常说的卡皇、无线网卡的不同牌子, 本质上应该讨论它们内部使用的芯片组,我们要关
介绍Allwinner 平台上基于wifimanager-v2.0 的WiFi 配网方式,包括softap(WiFi ap 模式热点配网),soundwave(声波配网),BLE(蓝牙低功耗配网)。
Re2Pcap是英文单词Request2Pcap和Response2Pcap的缩写。Community版的用户可以使用Re2Pcap快速的创建PCAP文件,并根据Snort规则对其进行测试。
还是实验室那台破服务器,连不上网。有没有界面,所以想着如何用一些命令来链接上 热点。 当然,在linux下链接wifi没有win下那么一点就好了! 首先我们需要的基本条件就是: 服务器上有无线网卡。 [root@tomato2 ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. 你看这就没有无线网卡。 当然,如果你觉得你确定你有无线网卡,那就在这样查一下: [root@tomat
Networking is the practice of connecting computers and sending data between them. That sounds simple enough, but to understand how it works, you need to ask two fundamental questions:
在每次成功的渗透测试背后,是数小时或者数天的准备,无线渗透测试也不例外。这一章中,我们会创建无线环境,我们在这本书中会将其用于实验。在你进行真实世界的渗透测试之前,将这个环境看做你的舞台吧。
之前使用VMWare安装完centos7使用的是NAT模式来使虚拟机联网,这种方式简单方便,但是不能做到和本机进行通讯,于是今天将利用桥接模式联网,使本机可以和虚拟系统进行通讯。让我们结合图片一步步开始吧:
• 介绍量产配置方法; • 介绍量产测试环境搭建流程; • 介绍如何使用dragonMAT 软件; • 方便开发人员按照说明进行量产环境的搭建。
实验室要新购笔记本x260,用于ROS调试,装上ubuntu-ros后,发现wifi不支持。
移动办公越来越普遍,而具有 SpaceMouse Pro 强大功能的企业版无线3D鼠标 SpaceMouse Pro Wireless 是专为移动办公的工程师、建筑师或设计师所定制。 SpaceMouse Pro Wireless 配备小型通用接收器、USB 集线器和时尚便携保护壳,方便随身携带。
This article covers some of the best penetration testing tools for Linux Cybersecurity is a big concern for both small and big organizations. In an age where more and more businesses are moving to the online medium of offering services, the threat of facing a cyber-attack has continued to rise.
原本配置的5g wifi 信道是149,启动会遇到set channel failed的问题,之前尝试过先连接其他wifi,再启动热点即可。但没有其他方法,因此更换了信道,经测试信道36可以正常启动。
Ping是Linux系统常用的网络命令,它通常用来测试与目标主机的连通性,我们经常会说“ping一下某机器,看是不是开着。它是通过发送ICMP ECHO_REQUEST数据包到网络主机,并显示响应情况,这样我们就可以根据它输出的信息来确定目标主机是否可访问(但这不是绝对的)。
今时今日,无论在家里的沙发上,还是在外面的咖啡厅,只要打开笔记本电脑,连上 Wi-Fi,就能通过网络与外界保持联系。但现在的 Wi-Fi 热点们大都能够通过 每张网卡对应的唯一 MAC 地址 来追踪你的设备。下面就来看一下如何避免被追踪。 现在很多人已经开始注重个人隐私这个问题。个人隐私问题并不仅仅指防止他人能够访问到你电脑上的私有内容(这又是另一个问题了),而更多的是指 可追踪性(legibility),也就是是否能够被轻易地统计和追踪到。大家都应该 对此更加重视 。同时,这方面的底线是,服务提供者在得到了用户的授权后才能对用户进行追踪,例如机场的计时 Wi-Fi 只有在用户授权后才能够使用。 因为固定的 MAC 地址能被轻易地追踪到,所以应该定时进行更换,随机的 MAC 地址是一个好的选择。由于 MAC 地址一般只在局域网内使用,因此随机的 MAC 地址也不大会产生冲突 。
狗机器人的大脑是一台 Raspberry Pi 4 计算机,它接收来自无线 PS4 控制器的命令并控制伺服电机,每条腿三个,将脚和身体移动到正确的位置。
FreeRTOS 上的网络,驱动部分源码没有开源,用户实际使用时也无需关系具体实现,更多的是做网络管理的逻辑接口开发,所以我们提供了网络中间件 Wi-Fi Manager,Wi-Fi Manager 支持sta, ap, monitor 等多种网络工作模式的管理,本文档重点介绍 Wi-Fi Manager 中间件的使用,配置,框架,接口。
往期周报汇总地址:http://www.armbbs.cn/forum.php?mod=forumdisplay&fid=12&filter=typeid&typeid=104 本周更新视频: BSP
惠普打印机对于 Linux 平台的支持一向很好,官方给出来的支持列表如下(不要太全面):
ProbeQuest是一款功能强大的Wi-Fi探测请求捕捉和嗅探工具,该工具可以帮助广大研究人员嗅探、捕捉和查看无线网卡附近的Wi-Fi探测请求。
安装了Ubuntu最新版本 14.04 之后,发现无线网卡不能使用,偿试安装驱动后,问题解决。
在家工作,孩子在线学习以及与同事和家人的视频会面,COVID-19大流行增加了我们对互联网服务的需求。
Power Pwn是由美国国防部高级计划研究局(DARPA)牵头开发的硬件集成化渗透测试平台,其目标是帮助企业或个人发现安全漏洞。 Power Pwn外形与普通电源差别不大,但一旦将它开启就能打开内置的安全测试软件,它的最大亮点是可以进行远程测试——安全测试人员只要把它接入需要进行测试的局域网、无线网络或者3G/GSM中,Power Pwn就能开始工作。 如下图,由于配备了蜂窝网络(GSM)功能,安全测试人员可以发送短信执行Linux系统(Bash)命令,它甚至还有类似Siri那样的声控功能。
depmod命令可产生模块依赖的映射文件,用于构建嵌入式系统。这些生成的文件将被modprobe命令使用。
概况 SIGCOMM(ACM Special Interest Group on Data Communications,ACM数据通信专业组)、MobiCom(ACM International Conference on Mobile Computing and Networking,ACM移动计算和网络国际会议)、INFOCOM(IEEE International Conference on Computer Communications,IEEE计算机通信国际会议)是通讯网络领域的三大顶级会议
前不久(我去,都大半年了)分析过 某二手电商App x-sign签名分析 类成员变量的分析 我们找到了几个伪装成so的jar包。
领取专属 10元无门槛券
手把手带您无忧上云