1,MESHING MESH DENSITY complete model
use length set element edge length to 2m
2-meshing create mesh mesh faces,
mesh body 101 face1(shell thickness 0.4)
对壳单元划分网格,选择把节点四边形单元。
3-
meshing create mesh mesh faces,
mesh body (shell thickness 0.8)
4-(与土接触的先不划分,待土体划分完毕再划分)
meshing create mesh mesh faces,
mesh body (shell thickness 1.5)
5-
meshing create mesh -mesh bodies
soil layer1 -bed rock
6-
meshing create mesh -mesh bodies
soil layer2-fen niantu
7-
meshing create mesh -mesh bodies
soil layer3-yuni
8-
meshing create mesh -mesh bodies
soil layer4-suishi dianceng
9-
meshing create mesh -mesh bodies
soil layer4-suishi suoding
10-
meshing create mesh -mesh bodies
soil layer4-suishi yibanhuitian
11-
meshing create mesh -mesh faces
shell thickness 1.5m
前面出现了错误,element group 没对上,
保存in文件,打开in文件,在in文件中编辑,将element group 改为3。
12-
meshing create mesh -mesh faces
shell thickness 1.6m,及shell thickness1.7m。
可以直接在in文件中操作
save in file and open it in ADINA AUI
看来直接改in文件的方法更方便一些,要多使用这个功能,特别是重复操作的部分,ADINA的AUI太不友好,可以只在AUI中操作一个,然后保存in文件,后到in文件中更改以生成整体模型。
领取专属 10元无门槛券
私享最新 技术干货