如何在编译RT2870驱动程序时克服此错误？
如何在编译RT2870驱动程序时克服此错误？
提问于 2014-12-04 13:05:14
我买了一个相当便宜的无线天线，现在不得不在Ubuntu14.04位上安装RT2870驱动程序。
我从它的官方网页下载了驱动程序文件2010_0709_RT2870_Linux_STA_v2.4.0.1，并试图编译它，但我得到了编译错误，我不知道如何克服。
所以，在我发布make之后，这个过程就开始了，过了一段时间，它就以
/home/xxx/Desktop/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpOSNetDevDetach’:
/home/xxx/Desktop/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_linux.c:1694:38: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default]
struct net_device_ops *pNetDevOps = pNetDev->netdev_ops;
^
/home/xxx/Desktop/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpOSNetDevAttach’:
/home/xxx/Desktop/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_linux.c:1731:38: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default]
struct net_device_ops *pNetDevOps = pNetDev->netdev_ops;
^
make[2]: *** [/home/xxx/Desktop/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_linux.o] Error 1
make[1]: *** [_module_/home/xxx/Desktop/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-3.13.0-39-generic'
make: *** [LINUX] Error 2是我张贴的行中的错误，还是我需要发布完整的生成日志？
如果这已经足够了，那么错误是什么以及如何修复呢？
如果你需要更多的信息，请告诉我。
编辑
lsusb的结果是
$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 021: ID 04e8:6864 Samsung Electronics Co., Ltd
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub我计划将天线连接到USB 3端口，但任何其他2.0端口都可以。
天线被称为“远距离”，通过同轴电缆连接到USB无线适配器，而USB电缆来自适配器到PC。
看上去像这样
当我试图看到带有插件/插件的dmesg响应时，我会得到以下响应：
USB 3.0 port
Dec 4 18:04:54 lmachine kernel: [10849.357767] usb 3-2: new full-speed USB device number 42 using xhci_hcd
Dec 4 18:04:54 lmachine kernel: [10849.357997] usb 3-2: Device not responding to set address.
Dec 4 18:04:54 lmachine kernel: [10849.561776] usb 3-2: Device not responding to set address.
Dec 4 18:04:54 lmachine kernel: [10849.765513] usb 3-2: device not accepting address 42, error -71
Dec 4 18:04:54 lmachine kernel: [10849.877506] usb 3-2: new full-speed USB device number 43 using xhci_hcd
Dec 4 18:04:54 lmachine kernel: [10849.877740] usb 3-2: Device not responding to set address.
Dec 4 18:04:55 lmachine kernel: [10850.081491] usb 3-2: Device not responding to set address.
Dec 4 18:04:55 lmachine kernel: [10850.285161] usb 3-2: device not accepting address 43, error -71
Dec 4 18:04:55 lmachine kernel: [10850.397118] usb 3-2: new full-speed USB device number 44 using xhci_hcd
Dec 4 18:04:55 lmachine kernel: [10850.397317] usb 3-2: Device not responding to set address.
Dec 4 18:04:55 lmachine kernel: [10850.601210] usb 3-2: Device not responding to set address.
Dec 4 18:04:55 lmachine kernel: [10850.804880] usb 3-2: device not accepting address 44, error -71
Dec 4 18:04:55 lmachine kernel: [10850.916809] usb 3-2: new full-speed USB device number 45 using xhci_hcd
Dec 4 18:04:55 lmachine kernel: [10850.916998] usb 3-2: Device not responding to set address.
Dec 4 18:04:56 lmachine kernel: [10851.120847] usb 3-2: Device not responding to set address.
Dec 4 18:04:56 lmachine kernel: [10851.324533] usb 3-2: device not accepting address 45, error -71
Dec 4 18:04:56 lmachine kernel: [10851.324563] hub 3-0:1.0: unable to enumerate USB device on port 2
USB 2.0 port
Dec 4 18:08:03 lmachine kernel: [11038.030811] usb 3-4: new full-speed USB device number 46 using xhci_hcd
Dec 4 18:08:03 lmachine kernel: [11038.031007] usb 3-4: Device not responding to set address.
Dec 4 18:08:03 lmachine kernel: [11038.234943] usb 3-4: Device not responding to set address.
Dec 4 18:08:03 lmachine kernel: [11038.438574] usb 3-4: device not accepting address 46, error -71
Dec 4 18:08:03 lmachine kernel: [11038.550577] usb 3-4: new full-speed USB device number 47 using xhci_hcd
Dec 4 18:08:03 lmachine kernel: [11038.550849] usb 3-4: Device not responding to set address.
Dec 4 18:08:03 lmachine kernel: [11038.754561] usb 3-4: Device not responding to set address.
Dec 4 18:08:04 lmachine kernel: [11038.958250] usb 3-4: device not accepting address 47, error -71
Dec 4 18:08:04 lmachine kernel: [11039.070209] usb 3-4: new full-speed USB device number 48 using xhci_hcd
Dec 4 18:08:04 lmachine kernel: [11039.070405] usb 3-4: Device not responding to set address.
Dec 4 18:08:04 lmachine kernel: [11039.274254] usb 3-4: Device not responding to set address.
Dec 4 18:08:04 lmachine kernel: [11039.477961] usb 3-4: device not accepting address 48, error -71
Dec 4 18:08:04 lmachine kernel: [11039.589985] usb 3-4: new full-speed USB device number 49 using xhci_hcd
Dec 4 18:08:04 lmachine kernel: [11039.590238] usb 3-4: Device not responding to set address.
Dec 4 18:08:04 lmachine kernel: [11039.793950] usb 3-4: Device not responding to set address.
Dec 4 18:08:05 lmachine kernel: [11039.997635] usb 3-4: device not accepting address 49, error -71
Dec 4 18:08:05 lmachine kernel: [11039.997665] hub 3-0:1.0: unable to enumerate USB device on port 4回答 1
Ask Ubuntu用户
回答已采纳
发布于 2014-12-04 13:33:28
这个旧的驱动程序，大约2010年，是为2.6.xx内核构建的；如您所见，您正在运行3.13.0-39。它永远不会编译。
这些设备的驱动程序rt2800usb默认包含在Ubuntu14.04中。如果它不像预期的那样工作，那么其他的事情就不对劲了。请告诉我们您的设备出了什么问题和详细信息：
lsusb我想你的USB无线连接到这个：
046d:c52b Logitech, Inc. Unifying Receiver谷歌，我发现：罗技的统一接收器支持吗？，我建议你安装ltunify，看看无线是否出现。
页面原文内容由Ask Ubuntu提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://askubuntu.com/questions/556578
复制相关文章
相似问题
腾讯云开发者
