centos7配置虚拟ip_centos临时设置ip

全栈程序员站长

发布于 2022-11-07 17:20:31

86100

代码可运行

文章被收录于专栏：全栈程序员必看全栈程序员必看

运行总次数：0

代码可运行

大家好，又见面了，我是你们的朋友全栈君。

环境概览

master：192.168.46.26 slave1：192.168.46.27 测试机：192.168.46.22（用于ping机器）

安装keepalived

 yum install -y keepalived

修改master keepalived.conf 配置文件

vim /etc/keepalived/keepalived.conf

interface 修改为自己的网卡（使用 ip addr 查看） priority 修改其参数为188 设置为主节点 virtual_ipaddress 配置虚拟ip

重启 keepalive 服务

 systemctl restart keepalived.service

查看虚ip是否启动成功

ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:f5:3d:f3 brd ff:ff:ff:ff:ff:ff
    inet 192.168.46.26/18 brd 192.168.63.255 scope global ens33
       valid_lft forever preferred_lft forever
    `inet 192.168.46.88/32 scope global ens33`
       valid_lft forever preferred_lft forever
    inet6 fe80::345:1d44:e755:79c2/64 scope link
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:63:02:0a brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:63:02:0a brd ff:ff:ff:ff:ff:ff

inet 192.168.46.88/32 scope global ens33 表示成功启动虚拟ip

修改slave1 keepalived.conf 配置文件

vim /etc/keepalived/keepalived.conf

interface 修改为自己的网卡（使用 ip addr 查看） priority 默认即可 virtual_ipaddress 配置虚拟ip

重启 keepalive 服务

 systemctl restart keepalived.service

查看虚ip是否启动成功

ip addr

# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:63:37:39 brd ff:ff:ff:ff:ff:ff
    inet 192.168.46.27/18 brd 192.168.63.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::34aa:c1e2:dc99:6721/64 scope link
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:63:02:0a brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:63:02:0a brd ff:ff:ff:ff:ff:ff

此节点作为从节点使用当主节点挂掉后，会使用此节点

使用测试机器ping 虚拟ip 看是否可以ping通

# ping 192.168.46.88
PING 192.168.46.88 (192.168.46.88) 56(84) bytes of data.
64 bytes from 192.168.46.88: icmp_seq=1 ttl=64 time=0.149 ms
64 bytes from 192.168.46.88: icmp_seq=2 ttl=64 time=0.303 ms
64 bytes from 192.168.46.88: icmp_seq=3 ttl=64 time=0.380 ms
64 bytes from 192.168.46.88: icmp_seq=4 ttl=64 time=0.239 ms
64 bytes from 192.168.46.88: icmp_seq=5 ttl=64 time=0.324 ms

发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/182991.html原文链接：https://javaforall.cn

本文参与腾讯云自媒体同步曝光计划，分享自作者个人站点/博客。

原始发表：2022年10月11日，如有侵权请联系 cloudcommunity@tencent.com 删除

ios

tcp/ip

https

网络安全

本文分享自作者个人站点/博客前往查看

如有侵权，请联系 cloudcommunity@tencent.com 删除。

本文参与腾讯云自媒体同步曝光计划，欢迎热爱写作的你一起参与！

登录后参与评论

0 条评论

热度