Centos7搭建DNS服务器

#1.安装bind软件

yum install bind -y

[root@localhost named]# vi /etc/named.conf 
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
// server as a caching only nameserver (as a localhost DNS resolver only).
//
// See /usr/share/doc/bind*/sample/ for example named configuration files.
//
// See the BIND Administrator's Reference Manual (ARM) for details about the
// configuration located in /usr/share/doc/bind-{version}/Bv9ARM.html

options {
	listen-on port 53 { 192.168.1.7; };
	listen-on-v6 port 53 { ::1; };
	directory 	"/var/named";
	dump-file 	"/var/named/data/cache_dump.db";
	statistics-file "/var/named/data/named_stats.txt";
	memstatistics-file "/var/named/data/named_mem_stats.txt";
	recursing-file  "/var/named/data/named.recursing";
	secroots-file   "/var/named/data/named.secroots";
	allow-query     { any; };

	/* 
	 - If you are building an AUTHORITATIVE DNS server, do NOT enable recursion.
	 - If you are building a RECURSIVE (caching) DNS server, you need to enable 
	   recursion. 
	 - If your recursive DNS server has a public IP address, you MUST enable access 
	   control to limit queries to your legitimate users. Failing to do so will
	   cause your server to become part of large scale DNS amplification 
	   attacks. Implementing BCP38 within your network would greatly
	   reduce such attack surface 
	*/
	recursion yes;

	dnssec-enable yes;
	dnssec-validation yes;

	/* Path to ISC DLV key */
	bindkeys-file "/etc/named.root.key";

	managed-keys-directory "/var/named/dynamic";

	pid-file "/run/named/named.pid";
	session-keyfile "/run/named/session.key";
};

logging {
        channel default_debug {
                file "data/named.run";
                severity dynamic;
        };
};

zone "." IN {
	type hint;
	file "named.ca";
};

include "/etc/named.rfc1912.zones";
include "/etc/named.root.key";

[root@localhost named]# 

//正向区域配置
zone "xiaochangwei.com" IN {
    type master;
    file "xiaochangwei.com.zone";
    allow-update { none; };
};

//反向区域配置
zone "1.168.192.in-addr.arpa" IN {
    type master;
    file "xiaochangwei.com.local";
    allow-update { none; };
};

$TTL 1D
@    IN SOA    @ rname.invalid. (
                    0    ; serial
                    1D    ; refresh
                    1H    ; retry
                    1W    ; expire
                    3H )    ; minimum
    NS    @
    A    192.168.1.7

www IN A 192.168.1.6
ftp IN A 192.168.1.6
mail IN CNAME www

$TTL 1D
@    IN SOA    @ rname.invalid. (
                    0    ; serial
                    1D    ; refresh
                    1H    ; retry
                    1W    ; expire
                    3H )    ; minimum
    NS    @
    A    192.168.1.7
6 IN PTR www.xiaochangwei.com.  #最前面的6代表ip的最后一位，因为在named.rfc1912.zones反向配置中，倒叙配置了ip前三位，所以这里就相当于说192.168.1.6解析到www.xiaochangwei.com这个域名
9 IN PTR www.zycloud.info.　　　 #同理，192.168.1.9就会解析到 www.zycloud.info这个域名。 注意域名后面有个点，不能省略

systemctl restart named
systemctl enable named

[root@1-5 ~]# nslookup ftp.xiaochangwei.com
Server:        192.168.1.7
Address:    192.168.1.7#53

Name:    ftp.xiaochangwei.com
Address: 192.168.1.6

[root@1-5 ~]# 
[root@1-5 ~]# nslookup www.xiaochangwei.com
Server:        192.168.1.7
Address:    192.168.1.7#53

Name:    www.xiaochangwei.com
Address: 192.168.1.6

[root@1-5 ~]# 

yum install bind-utils -y

[root@1-5 ~]# nslookup 192.168.1.6
6.1.168.192.in-addr.arpa    name = www.xiaochangwei.com.

[root@1-5 ~]# 

[root@1-5 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ens33 |grep DNS
DNS1=192.168.1.7
[root@1-5 ~]#