2019-05-17
查看Hadoop版本。
WZB-MacBook:target wangzhibin$ hadoop version
Hadoop 2.8.4
Subversion https://git-wip-us.apache.org/repos/asf/hadoop.git -r 17e75c2a11685af3e043aa5e604dc831e5b14674
Compiled by jdu on 2018-05-08T02:50Z
Compiled with protoc 2.5.0
From source with checksum b02a59bb17646783210e979bea443b0
This command was run using /Users/wangzhibin/00_dev_suite/50_bigdata/hadoop-2.8.4/share/hadoop/common/hadoop-common-2.8.4.jar
hadoop fs -cmd < args >
列出hdfs文件系统根目录下的目录和文件
hadoop fs -ls /
列出hdfs文件系统所有的目录和文件
hadoop fs -ls -R /
一级一级的建目录,父目录不存在的话使用这个命令会报错
command: hadoop fs -mkdir < hdfs path>
eg:
WZB-MacBook:~ wangzhibin$ hadoop fs -mkdir /test/20190517
WZB-MacBook:~ wangzhibin$ hadoop fs -ls -R /test
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 10:49 /test/20190517
所创建的目录如果父目录不存在就创建该父目录
hadoop fs -mkdir -p < hdfs path>
上传文件。hdfs file的父目录一定要存在,否则命令不会执行
command: hadoop fs -put < local file > < hdfs file >
eg:
$ hadoop fs -put tmp/tmp.txt /test
$ hadoop fs -ls -R /test
上传目录。hdfs dir 一定要存在,否则命令不会执行
command: hadoop fs -put < local file or dir >...< hdfs dir >
eg:
WZB-MacBook:50_bigdata wangzhibin$ hadoop fs -put tmp/ /test
WZB-MacBook:50_bigdata wangzhibin$ hadoop fs -ls -R /test
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 10:42 /test/tmp
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:42 /test/tmp/tmp.txt
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:40 /test/tmp.txt
从键盘读取输入到hdfs file中,按Ctrl+D(Control+D)结束输入。hdfs file不能存在,否则命令不会执行
command: hadoop fs -put - < hdsf file>
eg:
WZB-MacBook:50_bigdata wangzhibin$ hadoop fs -put - /test/20190517.tmp.txt
hello
world
WZB-MacBook:50_bigdata wangzhibin$ hadoop fs -ls -R /test
-rw-r--r-- 1 wangzhibin supergroup 12 2019-05-17 10:44 /test/20190517.tmp.txt
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 10:42 /test/tmp
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:42 /test/tmp/tmp.txt
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:40 /test/tmp.txt
在标准输出中显示文件内容
command: hadoop fs -cat < hdfs file>
eg:
WZB-MacBook:50_bigdata wangzhibin$ hadoop fs -cat /test/20190517.tmp.txt
hello
world
在标准输出中显示文件末尾的1KB数据
command: hadoop fs -tail < hdfs file>
eg:
WZB-MacBook:50_bigdata wangzhibin$ hadoop fs -tail /test/20190517.tmp.txt
hello
world
从hdfs中下载文件到本地。local file不能和 hdfs file名字不能相同,否则会提示文件已存在,没有重名的文件会复制到本地
command: hadoop fs -get < hdfs file > < local file or dir>
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -get /test/20190517.tmp.txt .
WZB-MacBook:tmp wangzhibin$ ls
20190517.tmp.txt tmp.txt
拷贝多个文件或目录到本地时,本地要为文件夹路径
command: hadoop fs -get < hdfs file or dir > ... < local dir >
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -get /test .
WZB-MacBook:tmp wangzhibin$ ls -l test/
total 24
drwxr-xr-x 2 wangzhibin staff 64 5 17 10:56 20190517
-rw-r--r-- 1 wangzhibin staff 12 5 17 10:56 20190517.tmp.txt
drwxr-xr-x 3 wangzhibin staff 96 5 17 10:56 tmp
-rw-r--r-- 1 wangzhibin staff 4662 5 17 10:56 tmp.txt
注意:如果用户不是root, local 路径要为用户文件夹下的路径,否则会出现权限问题。
每次可以删除多个文件或目录
command:
hadoop fs -rm < hdfs file > ...
hadoop fs -rm -r < hdfs dir>...
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -rm /test/20190517.tmp.txt
Deleted /test/20190517.tmp.txt
WZB-MacBook:tmp wangzhibin$ hadoop fs -ls -R /test
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 10:49 /test/20190517
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 10:42 /test/tmp
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:42 /test/tmp/tmp.txt
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:40 /test/tmp.txt
HDFS拷贝文件或文件夹。目标文件或者文件夹不能存在,否则命令不能执行,相当于给文件重命名并保存,源文件还存在。
command:
hadoop fs -cp < hdfs file > < hdfs file >
hadoop fs -cp < hdfs file or dir >... < hdfs dir >
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -cp /test/tmp.txt /test/20190517/
WZB-MacBook:tmp wangzhibin$ hadoop fs -ls -R /test
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 11:03 /test/20190517
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 11:03 /test/20190517/tmp.txt
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 10:42 /test/tmp
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:42 /test/tmp/tmp.txt
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:40 /test/tmp.txt
HDFS移动文件或文件夹。目标文件不能存在,否则命令不能执行,相当于给文件重命名并保存,源文件不存在。源路径有多个时,目标路径必须为目录,且必须存在。
command:
hadoop fs -mv < hdfs file > < hdfs file >
hadoop fs -mv < hdfs file or dir >... < hdfs dir >
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -mv /test/20190517/tmp.20190519.txt /test/tmp
WZB-MacBook:tmp wangzhibin$ hadoop fs -ls -R /test
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 11:06 /test/20190517
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 11:03 /test/20190517/tmp.txt
drwxr-xr-x - wangzhibin supergroup 0 2019-05-17 11:06 /test/tmp
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 11:04 /test/tmp/tmp.20190519.txt
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:42 /test/tmp/tmp.txt
-rw-r--r-- 1 wangzhibin supergroup 4662 2019-05-17 10:40 /test/tmp.txt
注意:跨文件系统的移动(local到hdfs或者反过来)都是不允许的
统计hdfs对应路径下的目录个数,文件个数,文件总计大小
显示为目录个数,文件个数,文件总计大小,输入路径
command: hadoop fs -count < hdfs path >
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -count /test
3 4 18648 /test
显示hdfs对应路径下每个文件夹和文件的大小
command: hadoop fs -du < hdsf path>
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -du /test
4662 /test/20190517
9324 /test/tmp
4662 /test/tmp.txt
显示hdfs对应路径下所有文件和的大小
command: hadoop fs -du -s < hdsf path>
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -du -s /test
18648 /test
显示hdfs对应路径下每个文件夹和文件的大小,文件的大小用方便阅读的形式表示,例如用64M代替67108864
command: hadoop fs -du -h < hdsf path>
eg:
WZB-MacBook:tmp wangzhibin$ hadoop fs -du -h /test
4.6 K /test/20190517
9.1 K /test/tmp
4.6 K /test/tmp.txt
以下命令参考:hadoop HDFS常用文件操作命令。没有实践。
hadoop fs -moveFromLocal < local src > ... < hdfs dst >
与put相类似,命令执行后源文件 local src 被删除,也可以从从键盘读取输入到hdfs file中
hadoop fs -copyFromLocal < local src > ... < hdfs dst >
与put相类似,也可以从从键盘读取输入到hdfs file中
当前版本中还未实现此命令
hadoop fs -copyToLocal < local src > ... < hdfs dst >
与get相类似
hadoop fs -getmerge < hdfs dir > < local file >
将hdfs指定目录下所有文件排序后合并到local指定的文件中,文件不存在时会自动创建,文件存在时会覆盖里面的内容
hadoop fs -getmerge -nl < hdfs dir > < local file >
加上nl后,合并到local file中的hdfs文件之间会空出一行
hadoop fs -text < hdsf file>
将文本文件或某些格式的非文本文件通过文本格式输出
hadoop fs -setrep -R 3 < hdfs path >
改变一个文件在hdfs中的副本个数,上述命令中数字3为所设置的副本个数,-R选项可以对一个人目录下的所有目录+文件递归执行改变副本个数的操作
hdoop fs -stat [format] < hdfs path >
返回对应路径的状态信息
format可选参数有:%b(文件大小),%o(Block大小),%n(文件名),%r(副本个数),%y(最后一次修改日期和时间)
可以这样书写hadoop fs -stat %b%o%n < hdfs path >,不过不建议,这样每个字符输出的结果不是太容易分清楚
hadoop archive -archiveName name.har -p < hdfs parent dir > < src >* < hdfs dst >
命令中参数name:压缩文件名,自己任意取;< hdfs parent dir > :压缩文件所在的父目录;< src >:要压缩的文件名;< hdfs dst >:压缩文件存放路径*示例:hadoop archive -archiveName hadoop.har -p /user 1.txt 2.txt /des
示例中将hdfs中/user目录下的文件1.txt,2.txt压缩成一个名叫hadoop.har的文件存放在hdfs中/des目录下,如果1.txt,2.txt不写就是将/user目录下所有的目录和文件压缩成一个名叫hadoop.har的文件存放在hdfs中/des目录下
显示har的内容可以用如下命令:
hadoop fs -ls /des/hadoop.jar
显示har压缩的是那些文件可以用如下命令
hadoop fs -ls -R har:///des/hadoop.har
注意:har文件不能进行二次压缩。如果想给.har加文件,只能找到原来的文件,重新创建一个。har文件中原来文件的数据并没有变化,har文件真正的作用是减少NameNode和DataNode过多的空间浪费。
hdfs balancer
如果管理员发现某些DataNode保存数据过多,某些DataNode保存数据相对较少,可以使用上述命令手动启动内部的均衡过程
hdfs dfsadmin -help
管理员可以通过dfsadmin管理HDFS,用法可以通过上述命令查看
hdfs dfsadmin -report
显示文件系统的基本数据
hdfs dfsadmin -safemode < enter | leave | get | wait >
enter:进入安全模式;leave:离开安全模式;get:获知是否开启安全模式;
wait:等待离开安全模式
用来在两个HDFS之间拷贝数据
WZB-MacBook:target wangzhibin$ mapred -help
Usage: mapred [--config confdir] [--loglevel loglevel] COMMAND
where COMMAND is one of:
pipes run a Pipes job
job manipulate MapReduce jobs
queue get information regarding JobQueues
classpath prints the class path needed for running
mapreduce subcommands
historyserver run job history servers as a standalone daemon
distcp <srcurl> <desturl> copy file or directories recursively
archive -archiveName NAME -p <parent path> <src>* <dest> create a hadoop archive
archive-logs combine aggregated logs into hadoop archives
hsadmin job history server admin interface
Most commands print help when invoked w/o parameters.
WZB-MacBook:target wangzhibin$ mapred job -list all
19/05/20 10:22:55 INFO client.RMProxy: Connecting to ResourceManager at /0.0.0.0:8032
Total jobs:1
JobId State StartTime UserName Queue Priority UsedContainers RsvdContainers UsedMem RsvdMem NeededMem AM info
job_1558104288185_0001 SUCCEEDED 1558104322342 wangzhibin default DEFAULT N/A N/A N/A N/A N/A http://WZB-MacBook.local:8088/proxy/application_1558104288185_0001/
mapred job -kill <job-id>
参考资料
原创声明:本文系作者授权腾讯云开发者社区发表,未经许可,不得转载。
如有侵权,请联系 cloudcommunity@tencent.com 删除。
原创声明:本文系作者授权腾讯云开发者社区发表,未经许可,不得转载。
如有侵权,请联系 cloudcommunity@tencent.com 删除。